Kaiwentuo to Debut at 2025 PTC Asia International Power Transmission, Motion Control and Fluid Power Exhibition

Kevin Top Company (Hebei Kevin Top Hydraulic Fittings Co., Ltd.) officially announced its participation in the 2025 PTC Asia International Power Transmission, Motion Control and Fluid Power Exhibition (PTC), which will be held at the Shanghai New International Expo Center from October 28 to 31, 2025. As a key player in the hydraulic fittings and equipment manufacturing sector, Kevin Top will showcase its latest technological achievements and products at this exhibition.
Since its establishment in 2015, Kevin Top has been committed to the R&D and production of hydraulic products and equipment. Evolving from the former Jingxian Kaituo Hydraulic Rubber & Plastic Products Factory, it has grown into a competitive enterprise with a registered capital of 6 million RMB, a 3,500-square-meter production workshop, 30 high-precision CNC lathes, and more than 10 sets of various precision processing equipment. The company achieves a daily output of 2,000 pieces, an annual sales volume exceeding 20 million RMB, and its products are also exported overseas with an annual export value of 5 million RMB. Equipped with a complete and scientific quality management system, Kevin Top's products are widely used in industries such as metallurgical continuous casting, oil drilling, construction machinery, mining excavation, and various hydraulic machinery.
At this year's PTC Exhibition, Kevin Top will focus on displaying its newly developed Servo-Driven New Ultra-Thin CNC Intelligent Pipe Crimping Machine at Booth A5, Hall E1. This product boasts outstanding advantages as follows:
- Ultra-Thin Structural Design: Adopting a forged integrated machine head with an overall thickness of <130cm and="" a="" floor="" area="" of="" only="" 1="" 4="" it="" saves="" 30="" of="" space="" compared="" with="" traditional="" equipment="" making="" it="" suitable="" for="" various="" production="" scenarios="" the="" machine="" head="" material="" undergoes="" quenching="" and="" tempering="" treatment="" reaching="" a="" hardness="" of="" hrc="" 50-58="" with="" impact="" strength="" increased="" by="" 50="" it="" features="" a="" trouble-free="" operation="" time="" of="" 8="" 000="" hours="" and="" only="" 1-2="" maintenance="" times="" per="" year="" li="">
- Dual-Speed Oil Cylinder + CNC System: The forged integrated oil cylinder ensures stability and eliminates oil leakage risks. It enables fast no-load movement and slow pressure application during crimping, with pressure control accuracy of ±0.5MPa. Combined with the 3-5 second pressure holding function, the joint rebound rate is <0.02mm, and="" the="" rework="" rate="" is="" reduced="" to="" below="" 1="" the="" 7-inch="" touchscreen="" intelligent="" cnc="" system="" supports="" three="" modes="" manual="" semi-automatic="" and="" fully="" automatic="" and="" has="" a="" built-in="" memory="" function="" for="" 100="" sets="" of="" processing="" parameters="" new="" operators="" can="" operate="" independently="" after="" only="" 2="" hours="" of="" training="" taking="" the="" 4kw="" model="" as="" an="" example="" the="" single-station="" processing="" time="" is="" shortened="" to="" 1="" 8="" minutes="" the="" daily="" output="" is="" increased="" to="" 800-1="" 000="" pieces="" and="" the="" efficiency="" is="" improved="" by="" more="" than="" 50="" compared="" with="" traditional="" equipment="" li="">
- Special Steel Mold Technology: The molds are made of Cr12MoV special steel and undergo vacuum furnace quenching, with a surface hardness of HRC 58-62. No galvanizing anti-rust treatment is required, and their service life is extended by approximately 30% compared with ordinary molds, effectively reducing costs and ensuring production continuity.
First launched in 1991, the PTC Asia International Power Transmission, Motion Control and Fluid Power Exhibition has become a key platform for brand display, trade cooperation, and technical exchange in the industry. Its exhibition scope covers 11 major categories including hydraulics, pneumatics, seals, and gears. Kevin Top aims to further demonstrate its technological strength, strengthen exchanges and cooperation with industry partners, and expand market share through this participation.
Kevin Top sincerely invites industry elites, partners, and friends from all walks of life to visit Booth A5, Hall E1 for guidance. Let us jointly discuss industry development trends, explore cooperation opportunities, and work together to promote the innovative development of the power transmission industry.